国产精品香蕉在线观看

  • <strike id="cpb9a"></strike>
    1. 
      

      <th id="cpb9a"><sup id="cpb9a"></sup></th>
    2. <strike id="cpb9a"></strike>
    3. ?
      Welcome: Jiangsu SangDion Machinery Co., Ltd.
      Language: Chinese ∷  English

      Large flame machine

      • Large flame recombiner
      Large flame recombiner

      Large flame recombiner

      • Commodity No.: 201911031001
      • Drying method: circulating air
      • Door panel: customized
      • Total power: 64.5kw
      • Product description: Large flame compound machine, flame machine, sponge compound machine, automobile interior sponge compound machine
      • INQUIRY


      江蘇圣頓機械有限公司

      JIANGSU SANGDION MACHINERY CO.,LTD

      Technical parameters of equipment:


      1.Working material width:1000 ~ 2000mm (customized)
      2.Mechanical spokes:2100mm
      3.Equipment line speed:0~45 m/min
      4.Equipment size (L * w * h):28280 × 2600 × 2800 mm
      6.Total power of equipment:About 15KW
      7.Power supply:380V 50Hz

      8.Total weight of equipment:About 1750KG
      Equipment characteristics:
      Sd-h2100 equipment control, user-friendly operation, easy maintenance, constant tension, high-precision fire discharge device, convenient to control the stability of fire spraying.
      Sd-h2100 equipment features:
      1.Push button control used;
      2.Simple operation;
      3.Equipped with built-in fire exhaust combustion system;
      4.Constant expansion force over feeding;
      5.The feeding method is simple;
      6.Humanized design of the machine saves operators;
      7.Equipped with water cooling device for cooling.
      Precautions for sd-h2100 operation:
      The operator can operate the equipment only after he is fully familiar with the performance and working principle of the machine. This equipment must be operated by specially assigned person. Non operators are not allowed to open or move it randomly.
      Before production, check whether cables, breakers, contactors, motors and other electrical appliances meet the requirements.
      Before production, check whether the three-phase power supply is balanced. It is strictly prohibited to start the equipment without phase.
      During the production period, check whether the rotary joints are safe, whether the pipeline is smooth, whether there is damage and oil leakage, and remove them in time.
      Before production, check whether the pressure of each barometer is normal and whether there is air leakage in the air circuit, and repair it in time
      Before production, check the fastening condition of each connection to see if it is loose or falling off, and repair it in time.
      Before large-scale production of equipment, small-scale test shall be done first, and large-scale production can be carried out only after success.
      Before production, check the lubrication conditions of each hydraulic station, reducer, bearing bush box, lead screw, etc., and fill the hydraulic oil and lubricating oil correctly and timely.
      After the machine is shut down, the accessories such as dust collection parts must be put on the rubber roller in time to remove the debris and dirt from all parts of the machine for the next use.
      It is strictly prohibited to contact the corrosive liquid with the cot, and ensure that the surface of each drive roll is clean and free of foreign matters at all times.
      It is strictly prohibited to pile up sundries around the host system, and keep the host clean and free of foreign matters at all times. Ensure a certain heat dissipation effect.
      Sd-h2100 maintenance:
      The lubricating oil of the reducer shall be changed every six months ·
      According to the actual production situation, the dust collection device shall be inspected regularly and replaced.
      Replace N46 or N32 anti-wear hydraulic oil every six months.
      Check the hydraulic oil tank and hot oil engine oil tank once a month to remove oil dirt and impurities, and add enough lubricating oil and heat transfer oil
      Add lubricating oil to bearing and lead screw every shift.
      After each shutdown, the accessories such as dust collection parts and anilox roll must be timely removed to remove the debris and dirt from all parts of the machine.
      The chain shall be checked every shift to ensure normal lubrication and timely tension.
      Check whether the connecting parts and fasteners are loose or missing in each shift and fasten them in time.
      Check the oil pump, oil cylinder, solenoid valve, distribution valve, oil pipe and other connections for oil leakage every shift.

      Scan the qr codeClose
      the qr code
      国产精品香蕉在线观看
    4. <strike id="cpb9a"></strike>
      1. 
        

        <th id="cpb9a"><sup id="cpb9a"></sup></th>
      2. <strike id="cpb9a"></strike>